ระบบการจักซื้อเป็นโมดูลที่คุณสามารถเลือกเองได้ ว่าต้องการให้มีหน้าที่การทำงานเป็นอย่างไร ซึ่งถ้าหากปราศจากระบบการจัดซื้อที่มีประสิทธิภาพแล้ว คุณคงไม่สามารถทราบได้ว่าแต่ละสต็อกสินค้าของคุณ จำเป็นต้องมีการสั่งซื้อสินค้าใดบ้าง
ระบบการจัดซื้อยังประกอบด้วยหน้าที่อื่นๆ
อีกมากมาย ไม่ได้มีหน้าที่เพียงแค่เป็นโมดูลเพื่อการซื้อเท่านั้น ยังทำหน้าที่ควบคุมความต้องการสินค้า
เปลี่ยนความต้องการสินค้าให้เป็นใบสั่งซื้อ อนุมัติหรือคัดค้านการจัดซื้อ นอกจากนั้นต้องบันทึกและตรวจสอบการรับสินค้าจากตัวแทนจำหน่ายอีกด้วย
การจัดการด้านการเงิน
และการจัดซื้อทั้งหลายสามารถทำได้ด้วยเงินสดสำรองที่มีอยู่ หรือจะใช้ระบบ LC จากสถาบันการเงินต่างๆ
ก็ได้เช่นกัน ซึ่งสิ่งอำนวยความสะดวกสบายทั้งหมดเหล่านี้ต่างก็ถูกรวบรวมและจัดการภายใต้การทำงานของโมดูลการจัดซื้อนี้ นอกจากนี้ เงินทุนผ่านระบบ LC ของสถาบันการเงินนั้นก็จะได้รับการปรับเปลี่ยนให้ทันสมัยโดยอัตโนมัติ โดยขึ้นอยู่กับการจัดซื้อ
และการชำระเงินคืนให้กับสถาบันการเงินเหล่านั้น ถ้าหากท่านต้องการให้การจัดเก็บข้อมูลทางด้านการเงินทั้งหมดข้างต้นนี้เข้าสู่ระบบบัญชีของท่านก็สามารถกระทำได้ ภายใต้โมดูลการจัดซื้อของ Arel
ใบเสร็จรับเงินหรือใบรับสินค้าต่างๆ จะทำหน้าที่อัพเดทข้อมูลการสั่งซื้อโดยอัตโนมัติ และยังสามารถใช้ตกแต่งข้อมูลของบัญชีรายจ่าย เพื่อการถ่ายโอนข้อมูลไปยังบัญชีส่วนกลางด้วย
นอกเหนือจากการจัดซื้อวัตถุดิบแล้ว การจัดซื้อสินค้าหรือบริการที่ไม่ได้อยู่ในรายการสั่งซื้อสินค้าก็จัดสามารถกระทำได้โดยแยกออกจากกันเป็นสัดส่วน โดยจะโมดูลเดียวกันเป็นตัวควบคุม การจัดซื้อสินค้าหรือบริการที่ไม่ได้อยู่ในรายการสั่งซื้อสินค้าดังกล่าว ยังสามารถควบคุมการใช้จ่ายที่จำเป็น
การอนุมัติและการปฏิเสธใบสั่งซื้อ การออกเอกสารใบสั่งซื้อสินค้า และการจัดการบริหารด้านการเงินทั้งหมดของท่านให้เป็นเรื่องง่าย
การนำระบบทั้งสองข้างต้นมาใช้จะช่วยให้ท่านสามารถทำระบบการสั่งซื้อได้ภายในครั้งเดียว แต่สามารถเข้าสู่ข้อมูลรายการสั่งซื้อทั้งหมด เพื่อบริหารและจัดการกลุ่มผู้จำหน่ายได้อย่างมีประสิทธิภาพ
หลักการและเหตุผล
มูลค่าการจัดซื้อชิ้นส่วนวัตถุดิบในโรงงานอุตสาหกรรมมรสัดส่วนมากกว่า 70% ของต้นทุนการผลิต
ดังนั้นการจัดซื้อที่มีประสิทธิภาพ(ซึ่งหมายถึงการจัดซื้อเพื่อให้ได้วัสดุตามคุณภาพที่ต้องการ (Right Quality) ราคาที่เหมาะสม (Right Price) และยังต้องมีอีก 3 องค์ประกอบสำคัญคือ ปริมาณ (Right Quality) จังหวะเวลา (Right Time) แหล่งขาย (Right Suppliers) ที่เหมาะสมที่สุด) จึงช่วยประหยัดต้นทุน (Cost Saving) ให้กับบริษัทและเพิ่มสมรรถนะและความวางใจได้ (Performance & Reliability) ของกระบวนการผลิตได้อย่างมหาศาล
การจะบรรลุสิ่งดังกล่าวได้
นักจัดซื้อในโรงงานอุตสาหกรรมต้องมีพื้นฐานความเข้าใจเกี่ยวกับมาตรฐาน คุณภาพ
ของวัตถุดิบต้องมีกระบวนการจัดซื้อที่มีประสิทธิภาพตั้งแต่ขั้นการวางแผนการวิเคราะห์
ความต้องการพัสดุ การหาแหล่งขาย การสืบราคา ต่อรองราคา การสั่งซื้อ การตรวจรับของ
การเก็บรักษาวัสดุ กระทั่งการชำระค่าสินค้า
The purchasing role for
manufacturing success
The Organization of purchasing
department
Buying the right quality
Manufacturing Purchasing Techniques
Buying material in the right
quantity
J-I-T purchasing
Buying the right suppliers
Price & Cost analysis
Tendering & negotiation
Storage and control of stock
Traffic management
Reducing total cost of material
procurement
Applying IT on purchasing &
E-procurement
กลุ่มเป้าหมาย
ผู้บริหาร , ผู้จัดการฝ่ายผลิต /บริหาร/บัญชีการเงิน , วิศวกร , หัวหน้างาน
ระยะเวลาการอบรม : 1 วัน (6
ชั่วโมง)
รูปแบบการอบรม :
-
In House Training ขั้นต่ำ
15 ท่าน/รุ่น
-
Public Training ไม่เกิน 30 ท่าน/รุ่น
ค่าธรรมเนียม : 4,000 บาท/คน (ไม่รวม VAT)
หมายเหตุ
: กรณีจัดอบรม In house Training อัตราค่าฝึกอบรมนี้ ยังไม่รวมค่าเดินทาง และค่าที่พักวิทยากร (ถ้ามี)
วิทยากร : ผศ.ดร.
อังกูร ลาภธเนศ และคณะ
(รายละเอียด เอกสารแนบ)
จัดอบรมโดย
บริษัทลัคกี้ ดรากอน เทรนนิ่ง แอนด์ เซอร์วิส จำกัด

เอกสารแนบ
ประวัติวิทยากร
1. การศึกษาระดับอุดมศึกษา (เรียงจากวุฒิสูงสุดตามลำดับ)
|
คุณวุฒิ |
ปี พ.ศ.ที่จบ |
ชื่อสถานศึกษา |
|
1.3.1 Ph.D
(Manufacturing Engineering and Operations Management) |
2546 |
|
|
1.3.2 M.S. (Human Factors and Systems
Engineering) |
2542 |
Embry-Riddle Aeronautical
University, |
|
1.3.3 B.S.
(Aviation Maintenance Management) |
2540 |
Embry-Riddle Aeronautical
University, |
2. ประวัติการทำงาน
2.1 อาจารย์สาขาวิศวกรรมโลจิสติกส์ คณะวิศวกรรมศาสตร์
มหาวิทยาลัยหอการค้าไทย
2.2 คณะกรรมการหลักสูตรบริหารธุรกิจมหาบัณฑิต
(ภาคพิเศษ)
2.3 คณะกรรมการบัณฑิตศึกษา
2.4 กรรมการผู้จัดการบริษัทที่ปรึกษาโลจิสติกส์และโซ่อุปทาน จำกัด
2.5 กรรมการผู้จัดการบริษัทยูพี
แมนูแฟคเจอร์ริ่ง แอนด์
เซอร์วิส จำกัด
3.
ภาระงานย้อนหลัง 3 ปี
3.1 งานสอน (โปรดระบุระดับว่าปริญญาตรี
หรือบัณฑิตศึกษา)
|
ระดับ |
รายวิชาที่สอน
|
ชม./สัปดาห์ |
เปิดสอนภาค/ปีการศึกษา |
|
ปริญญาตรี |
731007
(740007, NI309) การศึกษางานทางอุตสาหกรรม
|
2.30 ชม./สัปดาห์ |
ต้น/2547 ต้น/2548 ต้น/2549 |
|
ปริญญาตรี |
740622
การจัดการคุณภาพโดยรวม
|
2.30 ชม./สัปดาห์ |
ต้น/2547 ปลาย/2548 |
|
ปริญญาตรี |
740609
เออร์โกโนมิคส์
|
2.30 ชม./สัปดาห์ |
ปลาย/2547 |
|
ปริญญาตรี |
741643
การจัดการตลาด
|
2.30 ชม./สัปดาห์ |
ปลาย/2547 |
|
ปริญญาตรี |
721701
(NL 201) ความรู้พื้นฐานด้าน
โลจิสติกส์และโซ่อุปทาน
|
2.30 ชม./สัปดาห์ |
ฤดูร้อน/2547 |
|
ปริญญาตรี |
731703 (740621, NL304, 741621) ระบบและเทคโนโลยีสารสนเทศสำหรับ
โลจิสติกส์
|
2.30 ชม./สัปดาห์ |
ต้น/2548 ต้น/2549 |
|
ปริญญาตรี |
741704
กรณีศึกษาด้านโลจิสติกส์
|
3 ชม./สัปดาห์ |
ต้น/2549 |
|
ปริญญาตรี |
NL412 วิศวกรรมระบบ
|
3 ชม./สัปดาห์ |
ฤดูร้อน/2549 |
|
ปริญญาตรี |
BA 513 อุตสาหกรรมเพื่อความยั่งยืน
|
3 ชม./สัปดาห์ |
ปลาย/2549 |
|
บัณฑิตศึกษา |
บธ 506
การจัดการการปฏิบัติการเพื่อความได้เปรียบในการแข่งขัน
|
3 ชม./สัปดาห์ |
ปลาย/2547 ปลาย/2548 ต้น/2549 ปลาย/2549 |
|
บัณฑิตศึกษา |
MN 501 การจัดการโซ่อุปทาน
|
3 ชม./สัปดาห์ |
ต้น/2548 ต้น/2549 ต้น/2550 |
|
บัณฑิตศึกษา |
MS 571 เทคโนโลยีสารสนเทศในธุรกิจอาหาร
|
3 ชม./สัปดาห์ |
ต้น/2548 |
|
บัณฑิตศึกษา |
BA 532 Global Logistics and
Supply Chain Management (International Program)
|
3 ชม./สัปดาห์ |
ต้น/2548 ต้น/2549 |
3.2
ผลงานวิจัยตีพิมพ์
3.2.1
Laptaned, U. (2003). Measuring
Situation Awareness in Different Levels of Fidelity of Synthetic Environments:
Virtual Cockpit versus Conventional Flight Simulator. In Proceeding
of the 10th International Conference on Human-Computer
Interaction, 22-27 June, 2003 at The
3.2.2 Laptaned,
U. (2003). Situation Awareness in Virtual Environments: Theory and
Methodology. In Proceeding of the Ergonomics Society 2003
Annual Conference, 15-17 April, 2003 at
3.2.3
Laptaned, U. (2004). Applying
Human Factors to Improve Efficiency of Logistics Activities: Theory and Method. In Proceeding of the 4th Industrial-Academic
Annual Conference on Supply Chain and Logistics Management, 19-20 August, 2004,
3.2.4
Laptaned, U. & Yiangkamolsingh,
C. (2005). Designing a Grinding Machine for the Thai Butcher:
Considering the Anthropometry Data. In Proceeding
of Industrial Engineering Network, October, 2005,
3.2.5
ชนะ เยี่ยงกมลสิงห์ และ อังกูร ลาภธเนศ (2548). ความปลอดภัยของการใช้เครื่องบดเนื้อในประเทศไทย. In Proceeding of Industrial Engineering Network, October,
2005,
3.2.6
จารุนันท์ ธรานนท์
และ อังกูร ลาภธเนศ (2548). การศึกษาปัญหาคลังสินค้าของบริษัท
พีทีเอ จำกัด. In Proceeding of the 5th
GS1/TLAPS/Thai VCML Industrial-Academic Annual Conference on Supply Chain and
Logistics and Management, November, 2005,
3.2.7
Vadhanasindhu, P. and Laptaned,
U. (2005). Marketing Logistics: Opportunities and
Limitations. In Proceeding of the 5th
GS1/TLAPS/Thai VCML Industrial-Academic Annual Conference on Supply Chain and
Logistics and Management, November, 2005,
3.2.8
Laptaned, U. & Rattanawong,
W. (2005). An Evalution of
3.2.9
Laptaned, U. (2005). Implementing Extended
3.2.10 Laptaned,
U. (2005). Demand
Chain Management: The Other Side of Supply Chain Management. In
Proceeding of the 6th Asia Pacific Industrial Engineering and
Management Conference, 4-7, December, 2005,
3.2.11 จารุนันท์ ธรานนท์ และ อังกูร ลาภธเนศ (2549).การเพิ่มประสิทธิภาพการจัดการคลังสินค้าด้วยระบบ
Radio Frequency Identification : RFID ของบริษัท
เอ จำกัด.
In
Proceeding of the 1th University of the
Thai Chamber of Commerce Graduate Research Conference, May, 2006,
3.2.12
ลินดา ไชยนิรมิตกุล
และ อังกูร
ลาภธเนศ (2549).การศึกษาปัญหาและแนวทางแก้ไขปัญหาเชิงกลยุทธ์ในการจัดซื้อของมหาวิทยาลัยหอการค้าไทย. In Proceeding of the 1th University of the Thai Chamber of Commerce
Graduate Research Conference,
May, 2006,
3.2.13
สายใจ ชูวารี และ อังกูร
ลาภธเนศ (2549).การศึกษาปัญหา
และกำหนดกลยุทธ์การลดต้นทุนทางด้านโลจิสติกส์กรณีศึกษา บริษัท เอสพี เทรดดิ้ง (ประเทศไทย) จำกัด.
In
Proceeding of the 1th University of the
Thai Chamber of Commerce Graduate Research Conference, May, 2006,
3.2.14
พณพงษ์ วงศ์วาณิชย์ศิลป์
และ อังกูร
ลาภธเนศ (2549).
การศึกษาปัญหาและการกำหนดกลยุทธ์เพื่อแก้ไขปัญหาการจัดส่งสินค้า ไม่ตรงตามเวลาที่กำหนดของซัพพลายเออร์ บริษัท
PAINT (ประเทศไทย) จำกัด. In Proceeding of the 1th
University of the Thai Chamber of Commerce Graduate Research Conference, May, 2006,
3.2.15
ศิริรัตน์ ลาภเอกอุดม
และ อังกูร
ลาภธเนศ (2549).การเพิ่มประสิทธิภาพในการจัดการคลังสินค้าและการส่งมอบสินค้าของบริษัท
ปีรามิด จำกัด.
In Proceeding
of the 1th University of the Thai Chamber
of Commerce Graduate Research Conference, May, 2006,
3.2.16
วัลลภา ศานติวรางคณา
และ อังกูร
ลาภธเนศ (2549).
การศึกษาการปรับปรุงคุณภาพและการกำหนดกล ยุทธ์ของการผลิตยาในกรณีศึกษาบริษัทพระรามฟาร์มาซูติคอล จำกัด. In Proceeding of the 1th
University of the Thai Chamber of Commerce Graduate Research Conference, May, 2006,
3.2.17 ลินดา ไชยนิรมิตกุล และ อังกูร ลาภธเนศ (2549). การนำระบบการจัดซื้อ อิเลคทรอนิคส์ (E-
Procurement)
มาใช้ในองค์กร: กรณีศึกษามหาวิทยาลัยหอการค้าไทย.
In Proceedings of the 6th GS1/TLAPS/Thai VCML,
3.2.18 สายใจ ชูวารี และ อังกูร
ลาภธเนศ (2549).
การศึกษาปัญหาและกำหนดกลยุทธ์การลดต้นทุนทางด้านโลจิสติกส์: กรณีศึกษา บริษัทเอสพี เทรดดิ้ง (ประเทศไทย) จำกัด.
In Proceedings of the 6th GS1/TLAPS/Thai VCML,
3.2.19 จารุนันท์ ธรานนท์ และ อังกูร ลาภธเนศ (2549). การเพิ่มประสิทธิภาพการจัดการคลังสินค้าด้วย
ระบบ Radio Frequency Identification : RFIDของบริษัท เอ จำกัด. In Proceedings of the 6th
GS1/TLAPS/Thai VCML,
3.2.20 Ungul Laptaned (2006). Demand Chain Management:-Development of Performance Measurement:
Demand Chain Operations Reference (DCOR Model). In
Proceedings of the 7th Asia Pacific Industrial Engineering,
3.2.21 Ungul Laptaned (2006). Designing a Small Garbage Disposal Car: Anthropometric
Measurement and Ergonomics Issues. In Proceedings of the 7th
Asia Pacific Industrial Engineering,
3.2.22 Ungul Laptaned and Wanchai Rattanawong (2006). Infrastructure and Layout
Design
for Phitsanuloks
3.2.23 Ungul Laptaned (2006). Situation Awareness In Virtual
Environments: A Theoretical Model and Investigation With Different Interface
Designs. In Proceedings of the
International Association of Science and Technology for Development,
3.2.24 Ungul Laptaned (2549). Developing a Small Garbage Disposal Car for
Thai Industry. In Proceedings of the IE networks,
3.2.25 Ungul Laptaned (2007). Developing
Inland Container Depot (ICD) for the
3.2.26 Ungul Laptaned and Rotchanart Kripunyapong
(2007). An Analysis and Evaluation of Transportation
Services: Case Study in Logistics Management. In Proceedings of the 2nd
International Conference on Operations and Supply Chain Management,
3.2.27 Navy Heng
and Ungul Laptaned
(2007). Green Logistics Affecting the Involvement of
Households in Recycling and Reuse of Plastics,
3.2.28 Chantana
Thongma and Ungul
Laptaned (2007). Improving
Efficiency of Material Requirement Planning and Safety Stock. In
Proceedings of the 2nd International Conference on Operations and
Supply Chain Management,
3.2.29 Karuna Hongtai, Ungul Laptaned, and Adisorn Leelasiltham
(2007). Studying Problems and Defining Strategies for Solving Problems of
Delivering Supplier's Products.
In Proceedings of the 2nd International Conference on Operations and
Supply Chain Management,
3.2.30 Sirintip Sutthiwongsaard, Ungul
Laptaned, Navy Heng
(2007). Evaluation of the
Logistics Cost and Performance Measurement Thai Property Service Industry: A
case study of Oakwood Service Apartment,
3.2.31
Ungul Laptaned (2007)
Developing a Tree Stem Small Grinding Car for the Bangkok Metropolitan
Administration In Proceeding of the 8th Asia
Pacific Industrial Engineering and Management Conference, 9-13, December,
2007, Kaosioung, Taiwan.
3.2.32
ศิริอร
คงมนต์, อังกูร ลาภธเนศ (2550) การศึกษาปัญหาการจัดส่งสินค้าไม่ตรงต่อเวลา
และกำหนดกลยุทธ์เพื่อพัฒนากระบวนการทำงานที่เหมาะสมของบริษัท KKK จำกัด In
Proceeding of the 7th
Industrial-Academic Annual Conference on Supply Chain and Logistics Management,
3.2.33 วิราชิน รัตนถาวร, อังกูร ลาภธเนศ
(2550) การศึกษาปัญหา
และกำหนดกลยุทธ์เพื่อเพิ่มประสิทธิภาพในการส่งมอบสินค้า กรณีศึกษา บริษัท อินเตอร์
แพคเกจจิ้ง จำกัด In
Proceeding of the 7th
Industrial-Academic Annual Conference on Supply Chain and Logistics Management,
3.2.34
Ungul Laptaned
(2007) Developing a Tree Stem Small Grinding Car by Considering Ergonomic and
Anthropometry The
IE Network Conference 24 - 26 October 2007, Bangkok, Thailand.
3.2.35 Ungul
Laptaned (2008). Developing Logistics
Cluster Sectors for the
3.2.36 Heng, N.; Laptaned, U & Mehrdadi,
N.(2008) Recycling
and Reuse of Household Plastics International Journal of
Environmental Research, Vol. 2,
No. 1, 2008, pp. 27-36
3.3 ผลงานวิจัย
3.4
งานที่ปรึกษา
·
โครงการ Map
Ta Phut Logistics Terminal, บริษัท WYNCOAST Public
Co., Ltd.
·
โครงการ ICD
มาบตาพุด
และ ICD แหลมฉบัง, บริษัท WYNCOAST Public Co., Ltd.
·
โครงการการศึกษาความเป็นไปได้ทางการตลาด
นิคมอุตสาหกรรม อมตะนคร
จังหวัดชลบุรี, บริษัท WYNCOAST Public Co., Ltd.
·
โครงการวิจัยหลักการ
Six Sigma ในกองซ่อมอากาศยาน
บริษัทการบินไทย ปริญญานิพนธ์นักศึกษาปริญญาตรี มหาวิทยาลัยหอการค้าไทย
3.5 งานบริการทางวิชาการ
-Logistics
Management
-Supply Chain Management
-Manufacturing Purchasing
-Transportation Management
-Facility Management
-Conveying System